There are a lot of interesting things you can do with little computers that cost just $35. While you probably wouldn’t think of turning a $350 desktop or laptop computer into a single-purpose machine, there’s not much to lose by converting a computer that costs one tenth the price into a device that does one thing and does it well.

Michael Clemens used a Raspberry Pi as the basis of a device that reads audiobooks out loud at the push of a button. That’s all it does (unless you count pressing the button again to pause audio playback or pressing-and-holding it to skip to the previous track).

One Click audiobook player

The idea was to build a simple device that his wife’s 90-year-old grandmother could use to listen to audiobooks. She’s visually impaired which makes reading and operating electronics difficult.

Clemens put together a system with a button, a Raspberry Pi mini-computer, an SD card, a button, a few resisters, a case, and not much else. He can load books simply by plugging in a USB flash drive and waiting until a status LED stops blinking. The software supports a range of formats including FLAC, MP3, and OGG Vorbis.

Once the device boots up, it starts a script was pauses the audio book. Press the button and it will start playing. The software also remembers the last position, so if you shut down the device instead of just pausing it, you won’t lose your place. But as a low-power device, you could theoretically just leave the audiobook player “on” all the time.

The One-Button Audiobook Player by dm_508f0c296a2c8

via Hackaday

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign


Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.

Subscribe to Liliputing via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 9,502 other subscribers

3 replies on “Raspberry Pi becomes one-button audiobook player for the visually impaired”

  1. Where can I get one of these and how much will it cost?
    My visually impaired technophobe mother-in-law would love this.

  2. That is one of the coolest applications I’ve seen for a raspberry pi. Bookreaders are much more expensive than this, and the limited amount of controls is perfect for someone who is impaired.
    I used to have a friend who was in her 70’s but her vision was failing rapidly. She had been a read-a-holic when she was younger, but her vision just wasn’t working well enough to read the words. We got her a lighted ring magnifier, which helped for a while, but eventually she couldn’t see to read at all. I felt so bad for her, as her mind was still quite sharp but she just couldn’t see. Something like this would have been perfect for her.

Comments are closed.