Home Assistant is free and open source home automation software that allows you to control and interact with smart home gadgets. You can install the software on a single-board computer or in a virtual machine on a Windows, Mac, or Linux PC.

But soon there may be another option: the Home Assistant team is running a crowdfunding campaign for a purpose-built, customizable smart home hub called Home Assistant Amber. It’s up for pre-order through Crowd Supply and scheduled to ship at the end of June, 2022.

Home Assistant Amber is powered by a Raspberry Pi Compute Module 4, which connects to a carrier board with an M.2 expansion slot that can be used for storage, an AI accelerator card, or other add-ons.

The board also has a Zigbee module for talking to your smart home devices, and it’s compatible with the upcoming Matter smart home standard. Other features include two USB 2.0 Type-A ports, a USB 2.0 Type-C port, a 3.5mm audio jack, and a Gigabit Ethernet port with support for PoE (Power over Ethernet), allowing you to power the device and connect it to your home network with single Ethernet cable.

You can also use a DC power jack to connect a 12V/2A power supply.

There’s also a real-time clock with a CR2032 battery backup, red, green, and yellow status LEDs, a red push button that can perform a factory reset, and a blue button that will do… something else.  The developers are still working on that.

The Home Assistant Amber will be available with a custom heat sink designed for the system and a 4.8″ x 4.8″ x 1.4″ transparent plastic enclosure.

A pledge of $149 will reserve a complete kit with the carrier board, enclosure, and a Raspberry Pi CM4 with 2GB of RAM and 16GB of eMMC storage. Or you can pay $99 for an Amber Kit that ships without a Compute Module if you already have one and/or want to choose your own version (Raspberry Pi makes models with up to 8GB of RAM and 32GB of storage).

So to recap, you can choose your own memory and storage configuration, use the M.2 slot to add hardware, and use open source Home Assistant software to connect to a wide range of devices and services, set your own routines, monitor your device info, and more.

Don’t give a hoot about smart home automation, but think the kit looks kind of cool anyway? It also supports just about any other software that runs on a Raspberry Pi. So if you’d rather run the Debian-based Raspberry Pi OS instead of Home Assistant OS, you can do that.

That said, there’s a pretty long lead time on this crowdfunding project – place an order today and you’re unlikely to receive anything until at least next summer. And that’s only if everything goes according to plan.

The developers acknowledge that the global chip shortage may impact their ability to deliver. But they’ve already ordered and paid for enough components to manufacture about 4,500 devices (2,000 Amber Kits with a power supply, 2,000 with PoE, and 400 complete kits).

via LinuxGizmos and Home Assistant Blog

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign


Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.

Subscribe to Liliputing via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 9,544 other subscribers

7 replies on “Raspberry Pi-based Home Assistant Amber lets you build your own smart home hub (crowdfunding)”

    1. Hub for smart appliances, IoT. Devices which connect via WiFi or ZigBee. Hard drives are not needed for that nor more than one Ethernet connection (for the device itself).

  1. “SSD hard drive”

    Putting a heatsink and then wrapping entire thing into non-perforated plastic

    Hmm, weird things.

    1. Actually it does have two vey small vent holes above the red and blue buttons on the back. The Home Assistant board also has some small vent holes the seem to line up with venting on the bottom of the base (holes are between the Pi heatsink and M.2. module. I guess that would be basic level cooling but seems if you overclock or use the M.2 things would heat up.

Comments are closed.