Amazon’s 2nd-gen Fire TV Stick (the 1080p model that has a list price of $40) is powered by a MediaTek processor, much like Amazon’s Fire tablets. So it should come as no surprise that the same exploit that hackers have been using to unlock the bootloaders and root the latest 7 inch and 8 inch Amazon tablets can be applied to the Fire TV Stick 2.

As spotted by AFTV News, it’s now possible to unlock the bootloader and install a custom recovery on Amazon’s latest Fire TV Stick.

Xda-developers forum member k4y0z has posted a set of step-by-step instructions. Before you get started though, you should know that you’ll need two things: Linux and the willingness to open up your Fire TV Stick’s case.

In a nutshell the process involves downloading some software, connecting your Fire TV Stick to a computer with a USB cable, and running some commands in a Linux terminal. But in order to put the Fire TV Stick in a mode where it can receive those commands, you need to short a point on the system board.

Basically that means holding something conductive like a paperclip or a pair of tweezers so that it touches both the points marked CLK and GND in the image above.

So there is a little risk involved — but if everything goes according to plan you get a device with an unlocked bootloader, a custom recovery (TWRP), and root access, which means you can modify system files that would normally be hidden or protected.

If you mess anything up, TWRP should allow you to backup and restore your device. It also makes it possible to install custom ROMs… if anyone develops some for this platform.

One thing this hack does not do is prevent over-the-air updates though. So you may need to investigate options for blocking them if you want to prevent Amazon from disabling root or overwriting changes you’ve made through an automatic software update.

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign


Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.

Subscribe to Liliputing via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 9,543 other subscribers

7 replies on “2nd-gen Amazon Fire TV Stick hack: Unlock the bootloader, install custom recovery”

  1. Does anyone else have problems with the Fire Stick losing WiFi connection?

    Mine does it all the time. It all of a sudden says, “No WiFi network found”

    The only solution is restarting and then it will find the network again.

    1. Sometimes mine says it’s disconnected but it really isn’t. Odd behavior.

    2. I wanted to add to what I wrote:

      I had the 1st gen Fire Stick and it never lost its WiFi connection not even once.

      What I have now is the Fire TV (weird hanging diamond pendant) – that is what constantly loses its WiFi connection.

      1. My first gen Fire Stick will sometimes lose WiFi when I first boot it. I unplug it every time I am finished… mostly so my young one will not order pay shows.

    3. Try this next time it happens

      Settings > network > hover over your wifi network > “pause/play” button to check network status.

      Will show if stick is connected to wifi and if connected to internet.

      If any issues it will be shown under recommendations

      If NO ISSUES, network settings will have been reset anyway when you hit the “pause/play” button

      Hope this helped!

Comments are closed.