After building a DIY handheld computer based on a Raspberry Pi last year, developer rahmanshaber is back with version 2.

The new MutantC v2 is still a handheld computer with a slide-out keyboard (or rather, a slide-up display) that resembles a T-Mobile Sidekick phone or Sony Vaio UX computer. But it’s an upgrade over the original in some key ways.

The most important one? The MutantC v2 is battery powered, which makes it a truly mobile computer.

You can find a list of parts, design files, and instructions for building the handheld computer at the MutantC project page. Or if you’d rather just see it in action, you can check out some recent videos posted by the developer.

In a nutshell, this mobile computer is designed to add a QWERTY keyboard, a touchscreen display, and a battery to a Raspberry Pi or similar single-board computer.

The version featured in the videos is a Raspberry Pi 3 Model B with a 3.5 inch display, but you could also adapt the design to use a smaller or larger display or another SBC like a Raspberry Pi 4 or Raspberry Pi Zero W.

And unlike the original MutantC, which needed an external battery pack, the new model is powered by a single rechargeable battery, which provides around 2 hours of battery life on a charge.

The 3D printed case includes cut-outs for all of the Raspberry Pi’s ports, so you have HDMI, USB-C, Ethernet, and 4 x USB Type-A ports. But there’s also a 52-key thumb keyboard that you can use by sliding up the display when you want to type.

Rahmanshaber also put two shoulder buttons on top of the device, which can be used for navigating some aspects of the Linux-based operating system’s user interface without lifting your hands from the device to touch the display.

And under the hood there are expansion ports that you could use to add expansion boards for additional features such as GPS (although that would probably shorten the computer’s battery life).

There are also LED lights above the display for power and notifications.

Since the design is open source, you can buy and 3D print your own parts and assemble your own version of the MutantC v2, or adapt the design for your needs.

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker and hate online shopping.

Contribute to our Patreon campaign

or...

Contribute via PayPal

Join the Conversation

8 Comments

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

    1. I have a Nokia N810. It does have a VGA selfie cam, but it does not rotate. It’s also an older and slower platform than even the first RasPi, which is normal considering it’s a 12 years old device.

      1. N810 and N900 were great pocket computers….

        Shame what happened to Nokia…imagine what a N1xxx device would have been is company kept going…

        1. Oh, yeah, I used the N900 way longer it was a viable device, and only stopped doing so because it got stolen… It was really a full fat computer in my pocket. Only my current S8 with DeX and keyboard cover comes close.