Disclosure: Some links on this page are monetized by the Skimlinks, Amazon, Rakuten Advertising, and eBay, affiliate programs, and Liliputing may earn a commission if you make a purchase after clicking on those links. All prices are subject to change, and this article only reflects the prices available at time of publication.

Back in the days when most of us weren’t already carrying tiny screens in our pockets capable of streaming movies and TV shows from Netflix, Hulu, and YouTube, there was a market for portable DVD players.

You don’t see these portable media players in electronics stores as much as you used to. But if you’ve got an old one lying around there might be a way to put it to good use

Redditor nutsacrilege figured out how to hook up a Raspberry Pi Zero mini-computer a portable DVD player to create a portable Kodi media player. The built-in DVD player still works too.

The Raspberry Pi Zero W uses the DVD player’s power and auxiliary ports and an MCP3008 helps assign button presses to various Kodi actions. The modifications also include the addition of a USB hub and a USB sound card.

All told, the project uses about $30 worth of parts… including the Raspberry Pi Zero W computer itself. Add another $40 or $50 to pick up a DVD player from eBay if you don’t already have one. Just keep in mind that while these little device were designed to play DVD videos with resolutions of 720 x 480, some cheaper models only actually have 480 x 272 pixel displays.

Since the Raspberry Pi Zero W has built-in support for WiFi, you should theoretically be able to stream content from the internet, but nutsacrilege says that didn’t work very well. It is able to play music and movies from a USB flash drive though, and he says he was able to watch 3 movies before he had to stop and charge the battery.

The hacked DVD player/computer also supports Bluetooth for pairing with headphones, keyboards, or other accessories.

Update: Want to try to follow along at home? The person behind the project has posted step-by-step instructions at Instructables. Just keep in mind that you may need to modify a few steps if you have a different brand or model of DVD player. 

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign

or...

Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.

Subscribe to Liliputing via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 9,547 other subscribers

9 replies on “Raspberry Pi Zero W + old DVD player = portable Kodi media center”

  1. Brad…
    It’s articles like this that make me feel like I’m back on the Old Liliputing. I’d like to see more like this.

  2. I have been using an old Phillips DVD player like that for a spare Pi monitor. The DVD part wasn’t working so I was able to remove several of the components to get the power draw down. The only issue was with the different wiring for the AV connection that I had to figure out and solder wires in place. Mines a bit more ugly since I used an original Pi Model B stuck on the back.

    I bet if you added an external antenna the wifi and Bluetooth range would increase a lot.

  3. Huh? When one can buy an Envizen, Zeki, Digiland, etc. tablet w/DVD that can also be mounted for traveling for the same price or cheaper. I don’t get it?

    1. Think of it this way: You’re prolonging the life of something that a lot of people would see as obsolete, which is good for the environment. You’re also getting to do a fun project. It may not be the most cost effective way to get the same result, but if you like tinkering it may be more appealing.

    2. Could you recommend one of those?

      I would love to read a comparison of those.

    3. Why’d I do this? Ehhhh…why not? It was a fun project! I had most of the parts around already including the Pi Zero W. I only had to buy maybe $10 worth of other components to put it together.

      Plus, it was great learning experience and my kids loved it on our last road trip!

Comments are closed.