The new Raspberry Pi 3 single-board computer is the same size and price as last year’s Raspberry Pi 2. But the new model has an updated processor which is said to offer a 60-percent performance boost over the older model.

Unfortunately, with more power comes… more heat. While that might not be a problem for some workloads, Phoronix pushed the tiny computer to its limits while running a series of benchmarks recently, and notice that it gets much hotter under stress than its predecessor.

But there’s already a simple, inexpensive solution.

loverpi heatsink

A company called LoveRPi has introduced a $5 heatsink set for the Raspberry Pi 2 and 3. Just place the tiny aluminum heatsinks on top of the CPU and LAN chip using the thermal adhesive and they’ll dissipate heat generated by your tiny computer without the need for fans.

The company says the heatsink can reduce temperatures by more than 20 degrees Celcius.

207

Why does this matter? While it’s unlikely that a Raspberry Pi will run hot enough to cause permanent hardware damage, under some situations it could get hot enough to cause stability problems until the system cools off.

LoveRPi also notes that the temperature sensor on the Broadcom BCM2837 sensor is inaccurate at high temperatures, which keeps firmware throttling from kicking in and allowing the system to cool off on its own. So installing a heatsink can help keep the little computer from getting hot enough to cause problems in the first place.

via Phoronix

 

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign

or...

Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.