The HP TouchPad tablet has a 1.2 Ghz Qualcomm Snapdragon dual core processor. But if that’s not fast enough for you, it turns out the chip can easily support higher clock speeds.

HP TouchPad overclocked with Bricked Kernel

HP originally shipped the tablet with webOS software, and webOS hackers have built custom kernels that allow you to set the CPU speed as high as 1.7 GHz. But the TouchPad has also proven popular with folks looking to install Android on the 9.7 inch tablet.

If you install the latest version of CyanogenMod 9 for the TouchPad based on Google Android 4.0 you should be able to overclock the tablet using a variety of tools such as SetCPU, System Tuner, AnTuTu CPU Master, or ROM Toolbox — they’re all available from the Android Market.

Any of these tools should let you set the tablet’s top speed as high as 1.7 GHz. But if you want to go even further, xda-developers forum member show-p1984 has put together a custom kernel for the TouchPad called Bricked-Kernel.

You can install the custom Kernel using ClockworkMod recovery or adb. Once you’ve done that you should be able to set your CPU speed as high as 1914 MHz (or about 1.9 GHz).

The kernel also sets the default  speed at 1566 MHz.

All speeds higher than 1782 MHz are considered unstable, so you might not actually want to go that far if you don’t want to cause problems with your tablet. But there are other reasons to try the Bricked-Kernel on the TouchPad beside the ability to go above 1.7 GHz. The kernel is also designed to improve the tablet’s boot speed, offer better performance, and disable the GPU when the screen is off to help prolong battery life.

Support Liliputing

Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission).

But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping.

Contribute to our Patreon campaign

or...

Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it.

5 replies on “Overclock an HP TouchPad with Android and Bricked-Kernel”

  1. I have white HP Touchpad with 1.5 GHz and Dualcore. So Will I be able to Overclock my TP to 1.9 GHz without any problem?

    you said anything above 1.7 GHz is unstable, so does that apply to my TP too?

    1. Probably — the 1.5 GHz version is using the same chip as the 1.2 GHz version. HP just set the clock speed differently.

      But I’ve only tested this on my TouchPad. Any time you perform any hack like this there are risks involved. 

      1. I just searched around a bit. I found that, HP or Qualcomm can’t overclock the chip and sale for more price. That’s “Consumer Backlash”.

        Chances are they have done binning of APQ8060 processor.

  2. The touchpad is such an awesome device with the open source Android work.

Comments are closed.